English
SUKO-1

Gabatarwar PTFE Ram Tube Extruder

PTFE Ram tube extruder an tsara shi musamman don samar da bututun PTFE (Teflon) ko ultra high kwayoyin (UHMWPE).

1. PTFE Tube Ram Extruder

PTFE Ram tube extruder ne musamman tsara don samar da PTFE (Teflon) koUHMWPEtube.Dangane da girman bututun da ake buƙata, ƙirar injin ɗin kuma ya bambanta, ta amfani da ƙira daban-daban.

 

2. Ka'idar Aiki na Injin

Ana zuba PTFE foda a cikin ganga mai ciyarwa, an gyara foda kuma an tsara shi a ƙarƙashin matsin lamba na hydraulic press, sa'an nan kuma mai zafi ta cikin ɗakin dumama na wani lokaci, sintering da gyare-gyare, kuma a karshe bututun da ake buƙata ya fito, bututun. zai iya zama tsayi marar iyaka, mai amfani zai iya yanke bisa ga tsawon da ake bukata.

 

3. Samfuran Machine da Datasheet
Samfurin Inji Saukewa: PFG150 Saukewa: PFG300 Saukewa: PFG500
Tsari

A tsaye Ram Extruder M/c
Wutar lantarki KW (Motar Lantarki) 15 kw 22 kw 72kw
Girman Range OD 20-150 mm 150-300 mm 300-500 mm
Haƙuri na THK 0.1-0.2mm 0.1-0.2mm 0.1-0.2mm
Haƙuri OD 0.1-0.5mm 0.5-2 mm 3 mm
Tsawon Tube Extruded

Ci gaba da extrude tare da tsayi mara iyaka
Fitowa a kowace awa KG 8+ 10+ 13+
Wutar lantarki / PH/Hz 380V 50Hz 3P 380V 50Hz 3P 380V 50Hz 3P
  • Adana lokaci, mutum ɗaya zai iya sarrafa injuna da yawa.
  • Allon taɓawa PLC mai hankali da sauƙin amfani da aiki.
  • Kananan wurin aiki da ake buƙata saboda ƙaƙƙarfan ƙira da injin ceton wutar lantarki.
  • Mafi ingancin fitarwa da kayan aikin jiki ana iya daidaita su.
  • Madaidaicin sarrafa zafin jiki, ya kai digiri +-1.
  • Dogon rayuwa, tare da fasahar zamani da ingantaccen ƙira.
  • High elongation, tensile ƙarfi & takamaiman nauyi.
  • Tsarin ciyarwa ta atomatik, gami da ganga bakin karfe.

 

4. Umarnin Shigarwa
Samfurin Inji Tsayin bene na ƙasa Tsayin inji Sama da sarari inji Ramin Diamita
Saukewa: PFG150 3000-6000 mm mm 2460 1000mm 300mm
Saukewa: PFG300 3000-6000 mm mm 2879 1000mm mm 450
Saukewa: PFG500 3000-6000 mm 3100mm 1000mm mm 650

 

5. Tsarin Aikin Na'ura

  1. Bincika wiring, hoses da man hydraulic.
  2. Shigar da girman da ake buƙata.
  3. Yi amfani da tsarin ciyarwa ta atomatik ko ciyar da hannu, fara aikin injin ɗin.
  4. Fara dumama ta saita yanayin dumama ta hanyar PLC panel.
  5. Ana zuga bututun extrusion ta cikin ɗakin dumama.
  6. Yanke bututu don samun tsawon da kuke so.
  7. Ana iya dakatar da injin kuma rufe ta ta hanyar kula da PLC.

 

6. Kula da injuna da kayan gyara
  • A kai a kai duba tsayi, tsabta da zafin jiki na man hydraulic.
  • Tsaftace samfurin da ba a yi amfani da shi ba kuma a shafa mai mai hana tsatsa a saman don adanawa.
  • Ya kamata a shigar da firikwensin zafin jiki na zoben dumama daidai.
Lokacin aikawa: Nov-11-2018