Game da Sintering Furnace Cikakkun bayanai

Wadannansintering tanderuan sanye su da dumama juriya na lantarki ko tare da dumama inductive.Ana iya amfani da su don dalilai da yawa saboda suna amfani da vacuum…

Bayanan fasaha

1. Girman ɗakin: 150 x 150 x 150 mm (6 "x6" x 6")
2. Zazzabi Aiki: 400°C (ci gaba)
3. Matsakaicin Zazzabi:500°C
4. Sarrafa zafin jiki: 30 matakan shirye-shirye da PID sarrafa atomatik
5. Yawan dumama: 0 ~ 15°C/min (shawarwari: ≤10°C)
6. Daidaiton Zazzabi:+/- 1°C
7. Abubuwan dumama: Molybdenum Disilicide (MoSi2)
8. Wutar lantarki mai Aiki: AC 220V, Mataki ɗaya, 60/50 Hz (ko gwargwadon buƙatun ku)
9. Max.Wutar lantarki: 24 KW
10. Girman Waje: 500 x 485 x 700mm
11. Girman akwatin katako: 600 x 585 x 900mm
12. Net nauyi: 95 Kg
13. Babban Nauyi: 120 Kg

Siffofin

• Kulawar firikwensin zafin jiki
• Saka idanu na yanzu
• Maɗaukakin Maɗaukakin Ƙwararrun Ƙwararru

Wurin Wuri

• Lokacin sanya tanderun, mafi ƙarancin nisa na tanderun da kowane bango shine aƙalla 30 cm.Dole ne a sanya tanderun a cikin busasshen daki mai zafi.
• Tabbatar cewa an sanya naúrar akan ƙasa mai jure zafi.
• Kada a fallasa naúrar ga hasken rana kai tsaye.
• Kada a sanya kowane abu mai ƙonewa kusa da tanderun.

Canja kan tanderun

• Kunna iska a bayan tanderun.
• Kunna wutar lantarki a kan Panel.
• Latsa maɓallin daga ƙasa kuma dagawa zai sauko zuwa ƙananan matsayinsa.(Saboda rawar jiki a lokacin jigilar abubuwan da ke cikin firing chamber insulation za su taru akan dandalin tire na harbi. Dole ne a cire su da bushe bushe).
• Ayyukan panel da allon LCD;
• Sanya tire mai harbi akan dandalin tire mai harbi.

Kashe naúrar

Idan ba a yi amfani da tanderu ba, ya kamata a motsa daga cikin ɗakin wuta.Rufe ɗakin harbe-harbe zai kare kariya kuma ya guje wa shayar da danshi.Bayan an motsa dandalin tire na ɗagawa zuwa ɗakin harbi, kashe wutar lantarki (canza zuwa KASHE).

Nasihar aminci

Don amincin ku muna so mu tambaye ku don karanta waɗannan bayanan da suka dace da aminci gaba ɗaya kafin fara rukunin.

• Kada a sanya kowane abu kusa da tiren ɗagawa.
• Ba dole ba ne a yi amfani da murhun wuta ba tare da sanya tireloli masu harbi ba.
• Yayin ci gaba da harbe-harbe (tanderun yana gudana tare da matsakaicin zafin jiki), zafin jiki a tsakiyar babban harsashi na tanderun na iya kaiwa babban zafin jiki kusan 150 ℃.Sauran sassa na saman harsashi ne game da 70 ℃.Kar a taɓa murfin lanƙwasa.
• Idan an haɗa naúrar tanderu zuwa ga ma'aunin wutar lantarki, kar a isa cikin ɗakin buɗe wuta don guje wa haɗuwa da abubuwan rayuwa da zafi.
• Cire filogi daga sashin wutar lantarki kowane lokaci kafin a tsaftace tanderun.
• Ba lallai ba ne don tsaftace ciki na ɗakin harbi, tsaftacewa na casing tare da rigar rigar a cikin lokaci na yau da kullum zai tabbatar da amincin aiki.
• Ainihin, kada a yi amfani da ruwa mai ƙonewa don kowane nau'in aikin tsaftacewa.