Extruder a tsaye don samar da sandunan filastik

Siffofin Sanda na Tsaye: Ajiye lokaci da kuɗi; Mai hankali da sauƙin amfani; Dogon rayuwa, tare da fasahar zamani da ingantaccen ƙira; Min - Max Dia: 20-500mm; Samar da Sa'a: Extrusion a 9-18kg / h; Na atomatik;

Sunkoo Rod Extruder (polymer PTFE Rod extrusion) an ƙera shi ta amfani da sabuwar fasaha, cikakken abin dogaro da sauƙin aiki ga abokan ciniki.Aiki dangane da samarwa da ƙarfin sa'a na aiki gasa ga sauran injina.Ana buƙatar ƙarancin kulawa, yana ba da babban samarwa a kasuwa.

1.Horizontal Ram Extruder don sandar PTFE

2.Ram extruding inji ga PTFE sanda

3.Amfani don Pre-sintering PTFE abu.

4.Suit don sabon kayan PTFE ko Maimaita kayan PTFE.

Siffofin:

1. Ajiye lokaci da kuɗi, tayin farashi mai kyau ga abokan ciniki.

2. Ayyuka masu hankali da sauƙin amfani.

3. Ƙananan wurin aiki da ake buƙata saboda ƙaƙƙarfan ƙira da injin ceton wutar lantarki.

4. Super quality fitarwa da kuma jiki Properties ne daidaitacce.

5. Madaidaicin kula da zafin jiki, ya kai digiri + -1.

6. Dogon rayuwa, tare da fasahar zamani da ingantaccen ƙira.

Ram extrusion tsari ne da ke ba da damar ci gaba da samarwa da sarrafa PTFE (Polytetrafluoroethylene).Babban abu shine PTFE foda.Ana ciyar da foda a cikin bututun extrusion na cylindrical, wanda aka matsa ta hanyar rago kuma a lokaci guda, ana jigilar shi ta cikin bututu, wanda yake zafi har zuwa zafin jiki.