Injin Gyaran Foda Ta atomatik (SUKO-3T-01)

1. Halayen PTFE Molding Machine

1. Injin gyare-gyare sun kasu kashi biyu na injunan gyare-gyaren hannu, na atomatik da cikakken atomatik.Ta hanyar ci gaba da inganta fasahar latsa gyare-gyare, kayan aiki sun fi hankali, mafi kwanciyar hankali, kuma mafi inganci.
2. Nau'in atomatik mai hankali ana sarrafa shi ta tsarin PLC, don saita matsa lamba, kewayon, saurin, yawa, da lokacin zama, kuma aikin yana da sauƙi.
3. Tare da ƙira iri-iri, kayan aiki na iya saduwa da buƙatun masu amfani daban-daban, kuma a keɓance su ga abokan ciniki.
4. Kayan aiki yana gudana a tsaye na dogon lokaci, tare da ƙananan ƙara.Kuma yana rage farashi ta hanyar adana ƙarfi da kuzari yayin kula da matsa lamba.
5. Ana yin kayan aiki da gyare-gyare ta hanyar fasaha ta musamman, juriya na lalata, mai dorewa kuma tare da tsawon rayuwar sabis.
6. Tsarin kayan aiki yana da sauƙi kuma yana ɗaukar sarari kaɗan.
7. Samfuran gyare-gyare suna da kyakkyawan aiki dangane da ƙima da ƙarfin ƙarfi ba tare da walƙiya ba, babu bursu.
8. Cikakken atomatik gyare-gyaren inji, atomatik foda tsotsa, ƙararrawa lokacin da foda fita, da kirgawa.
9. Saurin gyare-gyare ba tare da foda mai tashi ba, ajiye albarkatun kasa..
10. Ana rarraba gyare-gyare zuwa hanyoyin latsawa daga sama zuwa ƙasa, ƙasa zuwa sama da latsa gefe biyu na lokaci ɗaya.
11. Tsarin gyare-gyaren gyare-gyare na iya kai tsaye zuwa siffar abokin ciniki da ake so, ceton masana'antu hanya, kayan aiki da sake zagayowar tsari.
12. Ana iya amfani da kayan ƙwanƙwasa, foda mai gudana da kai, foda mara nauyi a cikin injin gyare-gyare.
    

    ---

2. Abubuwan Bukatun Aiki na Kayan aiki

1. Ana buƙatar ƙasan rukunin yanar gizon don zama daidai, kuma nauyin rukunin yanar gizon bai ƙasa da buƙatun ƙira ba.
2. Dandalin aiki yana buƙatar sarari mai tsabta don rage ƙura.Zai fi kyau a sami bututun samun iska a cikin bitar don sauƙaƙe samun iska.
3. Ma'aunin wutar lantarki na masana'antu 380V 50Hz 3P, ana iya daidaita wutar lantarki gwargwadon bukatun mai amfani.
4. Masana'antar na dauke da katunan rarraba wutar lantarki, damtse iska da sauran kayan tallafi.
5. Yanayin zafin jiki na shuka bai kamata ya wuce 28 ° C ba.
   

   ---

3. Sigar Kayan aiki

4. Kayan Aiki Da Gyaran Mold

1. A kai a kai duba tsayi, tsabta da zafin jiki na man hydraulic.
2. Ana bada shawara don maye gurbin man fetur na hydraulic kowane watanni shida.
3. Maye gurbin sawa hatimai akan lokaci.
4. Ya kamata a tsaftace tsafta da kiyayewa a cikin lokaci, kuma ya kamata a rufe saman da man fetur mai karewa.
   

   ---

5. Bayan Sabis na Talla

1. Daga ranar da aka karɓi na'ura, lokacin garanti na duk na'urorin haɗi shine shekara guda.Muna ba da sabis na jagorar kulawa kyauta yayin lokacin garanti.
2. Idan akwai wata matsala tare da na'urorin haɗi a wajen lokacin garanti, da fatan za a tuntuɓe mu cikin lokaci don bayyana matsalar, kuma za mu samar da ƙudurin biyo baya a cikin sa'o'i 24.
3. Idan muna da mai rabawa na gida, za mu iya tuntuɓar mai rabawa na gida don haɗin kai.
4. Duk tambayoyi game da kayan aiki za a iya tuntuɓar mu ta wasiƙa, bidiyo, tarho, da sauransu.

Wayar Sabis: + 86-0519-83999079

6. Abubuwan Zaɓuɓɓuka masu alaƙa

Da fatan za a tuntuɓe mu don sauran kayan aikin PTFE.