SUKO-1

Extruder Atomatik Machine polymer PTFE Rod Ram PFB150 Dia 80mm-150mm

Barka dai, zo ka shawarci samfuranmu!

Extruder Atomatik Machine polymer PTFE Rod Ram PFB150 Dia 80mm-150mm


Bayanin Samfura

Alamar samfur

Sharhi

1. Halayen PTFE (UHMWPE) Ram Rod Extruder PFB20

  1. Ta hanyar ci gaba da ci gaba, kayan aikin suna da wayo, mafi karko da inganci.
  2. Kayan aikin ana sarrafa su ta tsarin PLC, kuma suna aiki ta atomatik tare da aiki mai sauki.
  3. Tare da ƙira daban-daban, kayan aikin na iya biyan buƙatu daban-daban na masu amfani, kuma a keɓance su ga abokan ciniki.
  4. Kayan aikin suna aiki tsayayye na dogon lokaci, tare da ƙarami. Kuma yana rage farashi ta hanyar ajiye karfi da kuzari yayin gyaran matsa lamba.
  5. Ana yin kayan aiki da kayan ƙira ta fasaha ta musamman, juriya ta lalata, mai ɗorewa kuma tare da tsawon rayuwar sabis.
  6. Tsarin kayan aiki yana da sauƙi kuma yana ɗaukar spacean sarari.
  7. Extruded kayayyakin da sun fi yi cikin sharuddan yawa da ƙarfi tensile.
  8. Sanye take da tsarin ciyarwa na atomatik, cike guga na kilogram 50-80, tsarin ciyarwa na atomatik na iya tabbatar da awanni 4-8 na aiki da kuma adana kuɗaɗen ƙwadago zuwa babban aiki.
  9. PTFE ragon extruder na iya ci gaba da tura sandar kuma ana iya yanke sandar gwargwadon bukatun.
  10. Bayar da cikakken tsarin tsari, wanda ya haɗa da cikakken saitin kayan haɗi masu dacewa, tsarin dumama da ɓoyewa, tsarin sanyaya, mai sarrafa zafin jiki, sashi, da sauransu
  11. Fitaccen sandar da ke tsaye ya fito daga sama zuwa kasa. Za'a iya sanya kayan aikin a hawa na biyu ko dandamali.

2. Bukatun Gudanar da Muhalli Masu Aiki

  1. Ana buƙatar kasan shafin ya zama daidai, kuma nauyin shafin bai ƙasa da bukatun ƙira ba.
  2. Tsarin aiki yana buƙatar sarari mai tsabta don rage shigar ƙura. Zai fi kyau a sami bututun iska a cikin bitar don sauƙaƙa samun iska.
  3. Matsakaicin ƙarfin masana'antu na 380V 50Hz 3P, ana iya daidaita ƙarfin lantarki daidai da bukatun mai amfani.
  4. Masana'antar tana dauke da kabad na rarraba wuta, iska mai matse iska da sauran kayan tallafi.
  5. Ana buƙatar kayan aiki tare da tsarin sanyaya. Ana iya amfani da bokiti / tankunan ruwa guda biyu tare da famfon sanyaya don sake amfani da albarkatun ruwa.
  6. Zafin zafin dakin ya zama bai fi 28 ° C.
  7. Kayan aikin extrusion na tsaye ya fito daga sama zuwa kasa. An shigar da kayan aikin a kan dandamali ko bene tare da tsayin sararin samaniya na kusan mita 2.8. Nisan tasiri a cikin doguwar hanya ta na'urar yana bukatar la'akari, kuma dole ne a tabbatar da tsayi mai tsayi a ƙarƙashin ramin madauwari na na'urar don biyan buƙatun tsawon sandar PTFE da aka fitar.
  8. Kayan aikin extrusion na kwance yana buƙatar yin la'akari da nisan tasiri a cikin kwance na kayan aikin, kuma ya zama dole don tabbatar da tsawon sandar PTFE. Kayan aikin sun hada da wani mudubi wanda yakai mita 4-7 (banda tsawon sandar da aka gama aikin), nisa na mita 1.2, tsayin mitoci 1.8.

3. Mahimman Kayan aiki

Samfurin Inji PFLB20 PFB80 PFB150
Tsari Rararwa ta tsaye Raddamarwa ta kwance
Karfin KW (Wutar Lantarki) 14 24 33
Rod Range Dia (mm) 4-20 25-80 80-150 (200)
Extruded Rod Tsawon Ci gaba da fitarwa tare da tsayi marar iyaka
Mai sarrafawa PLC + Taɓa Allon PLC + Taɓa Allon PLC + Taɓa Allon
Fitarwa (Kg / h) 7+ 8+ 10+
Awon karfin wuta / PH / Hz 380V 50Hz 3P 380V 50Hz 3P 380V 50Hz 3P
Amfani da Wutar Lantarki (KW / h) 2+ 2.5+ 3+
Yankin yanayin zafi 3-5 4-8 8-12
Nauyin Na'ura (Kg) 930 960 1220
Girman inji (mm) 2150 1800 1900
Yankin Mashin din (m2 ) 3.5 7 10
Mould An tsara girman ƙirar bisa ga ƙayyadaddun abokin ciniki. Cikakken tsarin sifar ya hada da jikin mutum-mutumi, kan extrusion, flange dangane, cikakken saitin zoben zafin zafin jiki, cikakken saitin na'urori masu auna sigina, tsarin rigar ruwa mai sanyaya, da layin haɗin mai-zafin jiki mai tsayi, kayan kwalliya da kayan tallafi. Finisharshen ƙarewa an bi da shi musamman don zama mai santsi, mai karko, da kuma lalata lalata. Kaurin auduga mai rufin ya fi 5mm, kuma kaurin dumama ya fi 10mm.

4. Girman Shigar da Kayan Aiki da Molin Girkawa


5. Kayan aiki Da kuma gyaran Gyara

  1. A kai a kai duba tsayi, tsabta da zazzabi na mai na lantarki.
  2. Ana ba da shawarar maye gurbin mai na hydraulic kowane watanni shida.
  3. Maye hatimai da aka sauya akan lokaci.
  4. Ya kamata a tsabtace abin ƙirar kuma a kiyaye ta cikin lokaci, kuma ya kamata a ruɓe farfajiyar da wani siririn ƙaramin mai kariya.
  5. Hankali ka riƙe firikwensin zafin jiki na murfin dumama, kuma adana shi da kyau.

6. Na'urorin haɗi Da kayayyakin gyara Bayani

  1. Kayan aikin sun hada da babban inji, tashar lantarki, gidan sarrafa wuta, mai ba da abinci ta atomatik, masu rikewa, kogwanin dumama jiki, da kuma wasu kayan aiki. Ana aika kayan haɗin haɗi masu mahimmanci ga abokan ciniki tare da kayan aikin.
  2. Ana aika jerin kayan haɗin haɗi don kayan aiki ga mai amfani tare da kayan aikin.
  3. Lokacin da mai amfani ya sayi kayan aikin kamfaninmu, ban da kayan haɗi masu mahimmanci, za mu samar da kayayyakin haɗin da ake buƙata ga mai amfani don maye gurbin da gyara kayan aikin. Sassan kayayyakin gyara daidaitattun sassa ne kuma ana iya siyan su a kasuwar gida.

7.Gidan jagora

  1. Saboda fasaha ta musamman na kayan aikin, kwastomomi zasu iya zuwa masana'anta don koyo game da shigarwa, izini, aiki, canjin ƙira, kiyayewa, jagorar tsari na kayan aikin kyauta kafin a kawo su.
  2. Idan ba za ku iya zuwa kamfaninmu don yin karatu ba saboda matsaloli kamar nesa, ma'aikata, lokaci, za mu iya shirya don injiniyoyi su zo don jagorantar shigarwa, kwamishinoni, aiki, sauya kayan kwalliya, kiyayewa, da kuma jagorancin aikin kayan aiki a ƙarƙashin yarjejeniyar daya bangaren.
  3. Hakanan zamu iya gudanar da jagora mai nisa. Masu amfani za su iya zaɓar wasu hanyoyi kamar tarho, bidiyo, imel, da sauransu don koyo game da saka kayan aiki, izini, aiki, canjin canjin, kiyayewa, jagorar tsari, da sauransu na kayan aiki

8.Bayan Sabis na Talla

  1. Daga ranar karɓar inji, lokacin garanti na duk kayan haɗin mashin ya shekara guda. Muna ba da sabis na jagorar kulawa kyauta yayin lokacin garanti.
  2. Idan akwai wata matsala tare da kayan haɗi a waje da lokacin garanti, don Allah tuntube mu cikin lokaci don bayyana matsalar, kuma za mu samar da ƙuduri na biyo baya cikin awanni 24.
  3. Idan muna da mai rarraba gida, zamu iya tuntuɓar mai ba da sabis na gida don haɗin kai.
  4. Duk tambayoyi game da kayan aikin ana iya tuntuɓar mu ta hanyar wasiƙa, bidiyo, tarho, da sauransu.

Wayar Sabis : + 86-0519-83999079


9.PTFE Rod Line Kayan Ciyarwar atomatik

Vacuum atomatik ciyar, ciki har da matsa iska baya hurawa tsarin, fara ciyar da tsarin, wanka tiyo, tsotsa gun, injin janareta, injin mai sarrafawa, PCB mai kula, kayan aiki 30-300 kg / h, diamita 150mm da tsawo 600mm, saita lokacin ciyarwa ta atomatik da lokacin fitarwa, foda guduna yana iya sarrafawa, duk samfuran ƙarfe, iko mai hankali. Gwanin hadawa shine 600mm a diamita kuma 700mm a tsayi, tare da motar ragewa 2.2kw, saurin motsawa na 15-25 juya / min, 8-10mm lokacin farin kauri kasa, da damar ciyarwa na 75-90kg.

SKVQC-10 Jerin Sanyawa:

Suna A'a Brand / Manufacturer
Injin janareta 1pcs China
316L bakin karfe tace 4pcs China
Injin hopper (304 bakin karfe) 1set Suko
Matsa iska baya busa tsarin Bawul din baya 1set New Zealand
Bangan pneumatic AirTAC
Tsarin fanko iska 1set China
Tsarin sarrafawa Kwamitin PC 1set Suko
Sauya wutar lantarki 1pcs China
Bawul din solonoid 1pcs AirTAC
Arƙarar tsotsa (Φ25) ƙarfin ƙarfe na ƙarfe mai ƙarfin ƙarfe 3M Jamus
Bakin karfe tsotsa bututun ƙarfe (Φ25) 1pcs L 350mm
Bakin karfe ganga 1pcs OD600mm; H700mm
Motar Gear 1pcs 1.5KW 15-20r / m

Sigogi na fasaha:

Misali Matsa iska mai amfani Matsalar iska
SKVQC-10 180L / min 0.4-0.6MPa

12. Abubuwan da Aka Zaɓi Na Zaɓuɓɓuka

Suna Takaitaccen Bayani
PTFE foda pre-sintering wutar makera Sintering PTFE iko
PTFE toshe waƙa Kashe dunƙulen zuwa iko
Injin foda na lantarki Don sako-sako da foda kafin hadawa
Sake yin fa'ida abu crushing samar line Dicer, injin wanki, marmari
Foda mahautsini / Foda & Mixaramar Maɗaukaki Don haɗa foda da man shafawa na ruwa
Na'ura mai yankan bariki Yanke manyan sanduna kamar yadda ake buƙata

Da fatan a tuntube mu don sauran kayan aikin PTFE.


 


  • Na Baya:
  • Na gaba:

    • Daga :

      Farashinsu yana da kyau ga abubuwa waɗanda baza ku iya samun su ko'ina ba. Na gamsu da duk wani abu da na siyo daga garesu.

    • Daga :

      Ya zuwa yanzu, mun gamsu da dogon lokacin jagorar wasu abubuwa. Ina son ƙarin samfuran daga EU.

    • Daga :

      Ya zuwa yanzu, mun gamsu da dogon lokacin jagorar wasu abubuwa. Ina son ƙarin samfuran daga EU.

    • Daga :

      Farashinsu yana da kyau ga abubuwa waɗanda baza ku iya samun su ko'ina ba. Na gamsu da duk wani abu da na siyo daga garesu.

    • Daga :

      Farashinsu yana da kyau ga abubuwa waɗanda baza ku iya samun su ko'ina ba. Na gamsu da duk wani abu da na siyo daga garesu.

    Rubuta bita a nan:

  • Rubuta sakon ka anan ka turo mana